A WiFi sign for guests: what to print and where to put it
A café, a guest room, a waiting room: the code is the easy part. Here is what to print around it, and where it should go.
Last updated 15 November 2026
If you have not made the code yet, start with how to make a WiFi QR code. This guide is about turning that code into a sign people will actually use.
Put it on a guest network first
Anyone who can see the code can join the network it describes. So before you print it for customers or visitors, set up a separate guest network on your router and use that one. Most home and small-business routers have a "guest network" setting. It keeps visitors away from your own computers, printers and cameras, and it means you can change the guest password without touching anything of yours.
What goes on the sign
- A short line above the code: "Scan to join our WiFi". Say what it does, so people know it is safe to scan.
- The code itself, printed dark on a light background with a clear margin of empty space around it.
- The network name in plain text under the code, so people can check they are joining the right one.
- Optional: the password in small text. Some older phones cannot scan WiFi codes, and some guests would rather type. Printing the password makes the code a convenience rather than the only way in. If you would rather not display it, add "Ask us for the password" instead.
Size and placement
On a table or a reception desk, people hold the phone close, so a code about 3 to 4 cm wide works. On a wall, make it bigger. The guide to printed QR code sizes has the numbers.
- Put the sign where people sit and wait, not where they walk past. Next to the till is better than above the door.
- Avoid glossy laminate right under a light. The reflection can stop a phone from reading the code. Matt is safer.
- Do not stretch, tilt or crop the code. Print it in proportion.
Test it on more than one phone
Scan the printed sign, not the screen, with an iPhone and an Android phone if you can. Do it in the lighting where the sign will hang. If either one fails, make the code bigger or reprint with a plainer background.
When you change the password
A WiFi code holds the network name and password itself. Change the password and the printed code stops working, so you need a new code and a new sign. This is true of every WiFi QR code, including ones made by other sites. A code that points to a web page can be edited later (see static and dynamic codes), but a WiFi code cannot, because the phone needs the actual password. If you change it often, keep the sign easy to reprint, for example a single A5 sheet in a clip frame.
A quick checklist
- Guest network set up, with its own password.
- Code made with the exact network name, capital letters included.
- Short line, network name and (optionally) password on the sign.
- Printed dark on light, with space around the code.
- Tested on the printed sign, on two phones.
More guides
- Do QR codes expire?
- Static vs dynamic QR codes
- How to make a WiFi QR code
- What size should a printed QR code be?
- How to put your menu on a QR code
- How to make a QR code for your Instagram
- A QR code for your business card
- Free QR code generator with no signup: how to spot the catches
- How to get more Google reviews with a QR code